Chucks notes and stuff

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Template for Debian System Release Upgrade ======

This template is meant to serve as a general upgrade path for any Debian release. This is my standard path and will be adjusted based on the "old" current release installed on the system and the target "new" release the server is being upgraded to.

I will normally create a complete system clone and use this template to work out the entire correct and functional path for the production system in question.

===== 1. Preparing for the upgrade =====

==== 1.1. Back up any data or configuration information ====

==== 1.2. Inform users in advance ====

==== 1.3. Prepare for downtime on services ====

Set maintainance window for upgrade with buffer
==== 1.4. Prepare for recovery ====

Verify the recoverability of system from backup image
==== 1.5. Prepare a safe environment for the upgrade ====

Local terminal or SSH access
==== 1.6. Develop tests for section 3.3 that will ensure correct execution of needed tasks ====

i.e.:
                a. Web server delivers correctly
                b. php scripts execute correctly
                c. DB runs correctly
                d. mail works

===== 2. Checking system status =====

find NON-Pure Debian packages
    # apt install aptitude apt-forktracer
    # aptitude search '~i(!~ODebian)'
    # apt-forktracer | sort

==== 2.1. Review actions pending in package manager ====

# aptitude
            Select GO and review
==== 2.2. Disabling APT pinning ====

check /etc/apt/preferences & /etc/apt/preferences.d/ for entries
==== 2.3. Checking packages status ====

# dpkg --audit
            # aptitude search "~ahold"
            # dpkg --get-selections | grep 'hold$'

To remove a hold on a package: echo package_name install | dpkg --set-selections
==== 2.4. Remove proposed-updates section if present in /etc/apt/sources.list ====

==== 2.5. Verify Unofficial sources are available for target Debian version ====

===== 3. Upgrading current version =====

3.1. Update current installation
            # sudo apt update
3.2. Upgrade current installation
            # sudo apt upgrade
3.3. Check functionality
            Verify all services required of current host is functioning correctly
3.4. Upgrade current distribution
            # sudo apt dist-upgrade
3.5. Check functionality
            see 3.3 above

===== 4. Preparing sources for APT =====

4.1. Adding APT Internet sources
            # sudo sed -i 's/CURRENT_RELEASE/TARGET_RELEASE/g' /etc/apt/sources.list
            # sudo sed -i 's/CURRENT_RELEASE/TARGET_RELEASE/g' /etc/apt/sources.list.d/*
4.2. Adding APT sources for a local mirror
            Only required for special in-house software
4.3. Adding APT sources from optical media
            Only required for special 3rd party delivered software

===== 5. Upgrading packages =====

Ensure all partition mountpoints are mounted read-write
        # mount -o remount,rw /mountpoint

5.1. Recording the session
            # script -t 2>~/upgrade-TARGET_RELEASEstep.time -a ~/upgrade-TARGET_RELEASEstep.script
         To replay session use scriptreplay
            # scriptreplay ~/upgrade-TARGET_RELEASE.time ~/upgrade-TARGET_RELEASE.script
5.2. Updating the package list
            # apt-get update
5.3. Make sure you have sufficient space for the upgrade
            # apt-get -o APT::Get::Trivial-Only=true dist-upgrade
5.4. Minimal system upgrade
            # apt-get upgrade
5.5. Check functionality
            See 3.3 above
5.6. Upgrading the system
            # apt-get dist-upgrade
5.7. Check functionality
            See 3.3 above

===== 6. Possible issues during upgrade =====

6.1. Dist-upgrade fails with “Could not perform immediate configuration”
            # apt-get dist-upgrade -o APT::Immediate-Configure=0
6.2. Expected removals
6.3. Conflicts or Pre-Depends loops
            use -o APT::Force-LoopBreak=1 with apt-get
         or
            # dpkg --remove package_name
        or
            # apt-get -f install
            # dpkg --configure --pending
        or
            # dpkg --install /path/to/package_name.deb
6.4. File conflicts
            # dpkg -r --force-depends package_name
6.5. Configuration changes
            Usually answer "YES" to files in /etc/init.d directory or /etc/manpath.config
6.6. Change of session to console
            Ctrl+Alt+F1 should recover the terminal window

===== 7. Upgrading kernel and related packages =====

7.1. Install any needed kernel metapackage
            Check for meta package
                # dpkg -l "linux-image*" | grep ^ii | grep -i meta
            if none are installed check which ones are available
                # apt-cache search linux-image- | grep -i meta | grep -v transition
            select correct one based on value returned by running "uname -r" eg. kernel “2.6.32-5-amd64”
                # apt-cache show linux-image-amd64

===== 8. Preparing for the next release =====

8.1. Purging removed packages
            Remove redundant or obsolete packages. see 5.3 above
            get list of removed packages
                # dpkg -l | awk '/^rc/ { print $2 }'
            remove using
                # apt-get purge $(dpkg -l | awk '/^rc/ { print $2 }')
            or use
                # aptitude search '~c'
                # aptitude purge '~c'

===== 9. Obsolete packages =====

9.1. Dummy packages

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International