Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 3.15.192.0
Lock expires at: 2025/03/14 20:46 (13 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Cleaning up PVE Corosync after removing from cluster ======

 At times it will be needed to remove a server from a cluster or there has been problems connecting a new node to an existing ProxMox cluster. Once the server has been removed from the cluster using "pvecm delnode" there will be leftover cluster configs on the removed node that will prevent rejoining to the ProxMox cluster or cause troubles when connecting to another cluster.

 When this happens it will be necessary to get to a point where pve-cluster/corosync can start fresh. For this to work you will also need to ensure that the server has been completely and cleanly removed from the ProxMox cluster as well. The steps to clean pve-cluster/corosync are as follows:
  
  
<code>systemctl stop pve-cluster corosync
pmxcfs -l
rm /etc/corosync/*
rm /etc/pve/corosync.conf
killall pmxcfs
systemctl start pve-cluster</code>

Chucks notes and stuff

User Tools

Site Tools

Page locked

Page Tools